There is no single import duty rate for tile trim. The duty on any shipment is built from three things. Classification comes first, and it follows the material. Then come the origin of the goods and the trade-remedy measures the destination applies to that origin. The same edge profile in aluminium, stainless steel, brass or PVC can land under four different headings and four different duty bills.
Rates have also moved repeatedly through 2025 and 2026, in some markets more than once a year. Any figure quoted without a date and a product code should be treated as stale. This guide explains how the number is built, market by market, and how to check the current figure for your own shipment. It covers the tariff step only; the full buying process is in our guide to importing tile trim from China. Nothing here is tax or legal advice, and final classification always rests with your customs authority and broker.
Step One: Classification Follows the Material
Customs does not classify goods by the name on the carton. It classifies the product as imported, using the Harmonized System (HS). For tile trim, the material and the cross-section decide the heading. Most trim is imported as long extruded or formed lengths, and that is the straightforward case in the table below.
| Material | Where it usually lands | What decides it |
|---|---|---|
| Aluminium | Heading 7604 — bars, rods and profiles. Hollow profiles: 7604.21. Open profiles (L, square-edge, round-edge shapes): 7604.29. | Whether the cross-section fully encloses a void. US customs rulings on 6063 and 6463 profiles apply exactly this test. |
| Stainless steel | Heading 7222 — angles, shapes and sections of stainless steel (7222.40). | How far the profile is worked. Some formed stainless pieces are argued into Chapter 73 as other steel articles instead, which changes the remedy picture. |
| Brass | Heading 7407 — copper bars, rods and profiles; brass lines sit under 7407.21. | Brass is a copper-zinc alloy, so trim follows the copper headings, not a brass heading of its own. |
| PVC | Heading 3916 — profile shapes of plastics; PVC lines sit under 3916.20. | Whether the profile is further worked after extrusion. Heavy extra working can push a plastic moulding into heading 3926. |
Two cautions matter more than the table. First, form beats intention. US customs has moved a cut-to-length aluminium counter trim out of heading 7604 entirely, because as imported it was already a finished household article. Trim shipped as standard lengths for cutting on site is the clean case. Second, kits and assemblies are classified as presented. Corner pieces, end caps and connectors packed with profiles can be treated differently from the profiles alone.
The ranges we sell follow the same split: aluminium tile trim, stainless steel tile trim, brass tile trim and PVC tile trim.
Step Two: Origin Multiplies the Result
The second input is origin, meaning where the goods were made, not where they were shipped from. Origin normally follows the last substantial transformation. Extruding billet into a profile is such a transformation; cutting, anodising or packing usually is not, on its own.
This matters because most extra duties are origin-based. A China-origin profile keeps its China exposure through most third-country finishing, and the US, EU and UK all run anti-circumvention checks on routed goods. Expect to document origin properly: mill certificates, production records and a certificate of origin that matches the declared story. If your supply chain crosses borders, settle the origin analysis with your broker before the first order, not at the first entry.
United States: A Stack, Not a Rate
For the US, build the duty in layers. The base layer is the ordinary (MFN) rate in the Harmonized Tariff Schedule. As of October 2026, the general rates for the main trim lines are:
- Aluminium hollow profiles (7604.21): 1.5%
- Aluminium open profiles (7604.29.10): 5%
- Brass profiles (7407.21): 2.2%
- PVC profiles (3916.20): 5.8%
- Stainless angles, shapes and sections (7222.40): many lines are duty-free at this layer
Layers Two and Three: Section 232 and the China Measures
The second layer is Section 232, the metals programme. Since 4 June 2025 it has charged 50% on covered aluminium and steel articles, with UK-origin goods at 25%. Copper joined on 1 August 2025 at 50%, and heading 7407 is on the covered list, so brass trim is inside this layer too.
Since 6 April 2026, the duty is assessed on the full customs value of the article. It splits into a 50% tier for primary metal articles and a 25% tier for derivative products. Which tier your exact code occupies is an annex lookup, not a guess.
The third layer is China-specific. Aluminium extrusions from China have sat under US anti-dumping and countervailing duty orders for years (Commerce cases A-570-967 and C-570-968). The orders follow a written product description rather than a code list. The cash-deposit rate is set per exporter, so two factories can carry very different rates.
On top of that, a Section 301 action in force since 24 July 2026 adds 12.5% to products of China. It does not stack onto goods already covered by Section 232. It replaced a temporary 10% surcharge that expired the same day, which is why calculators built before mid-2026 now give wrong answers.
What the Stack Looks Like in Practice
| Illustrative stack, China origin to US, October 2026 | Confirmed layers | Total before AD/CVD |
|---|---|---|
| Aluminium open profile (7604.29.10) | 5% MFN + 50% Section 232 | 55% |
| Brass profile (7407.21) | 2.2% MFN + 50% Section 232 (copper) | 52.2% |
| PVC profile (3916.20) | 5.8% MFN + 12.5% Section 301 (2026 action) | 18.3% |
Read the table as a method, not a quote. It excludes anti-dumping and countervailing deposits, which vary by exporter. It also excludes any older Section 301 list duty, which is set line by line in the Chapter 99 notes. Your broker confirms both against the exact ten-digit code before you price a programme. The primary sources are the USITC tariff schedule and CBP’s filing guidance for the aluminium and copper measures.
European Union: The Anti-Dumping Layer Dominates
EU buyers start in the TARIC database, which shows the third-country duty and every measure attached to a code and origin. For aluminium trim from China, one measure dwarfs the rest. Since March 2021, Regulation (EU) 2021/546 has imposed anti-dumping duties of 21.2% to 32.1% on aluminium extrusions from China. The rate is set per exporter. The scope is broad: bars, rods, profiles, tubes and pipes, including pieces prepared for use in structures, under heading 7604 and related codes.
The measure was due to expire in March 2026. The Commission opened an expiry review on 27 March 2026 instead, and the duties stay in force while it runs. Treat them as live for any 2026 or 2027 programme. Aluminium is also inside the EU carbon border adjustment (CBAM), whose financial phase began on 1 January 2026. The importer needs authorised-declarant status and buys certificates against embedded emissions. Check in TARIC whether your exact CN code carries a CBAM obligation. The regulation itself is on EUR-Lex.
United Kingdom: Two Checks, Same Pattern
The UK runs its own tariff and its own trade remedies, so EU figures do not carry over. In the UK tariff, heading 7604 lines carry a 6% third-country duty. Separately, the UK has applied its own anti-dumping duty to aluminium extrusions from China since 17 December 2022. The residual rate is 35.1%, and named exporters carry individual rates between 0% and 15.6%. The product scope mirrors the EU description, with the same practical exclusions, such as very large extrusions and finished-goods kits.
The UK Online Tariff shows both in minutes: enter the code, set China as origin, and read duty and remedy together. Never price from the duty line alone.
Australia: The Register Matters More Than the Tariff
Australia’s ordinary tariff is only half the story. The other half sits with the Anti-Dumping Commission. Aluminium extrusions exported from China have carried interim dumping and countervailing duties in Australia since 2010, and the measures currently run to 2030. Rates are exporter-specific and are published through the Commission’s Dumping Commodity Register, which is the document to check for your supplier’s name. New exporters can apply for their own review and their own rate, so the register’s general position is not necessarily your factory’s position.
Run both checks for every programme: the ABF tariff pages for the classification and any preference, and the Dumping Commodity Register for the remedy layer. If your supplier is not listed, assume the residual treatment applies until the register or your broker says otherwise.
NIUYUAN’s own position changed in 2026, under Accelerated Review No. 700 (report REP 700, June 2026). The ministerial decision (ADN 2026/081) took effect on 13 July 2026. Aluminium extrusions supplied directly by Foshan Nanhai Niuyuan Hardware Product Co., Ltd. are now listed in the Dumping Commodity Register under DSN 330. The dumping duty now runs on a floor-price basis. No interim dumping duty is collected while the export price stays at or above the assessed floor price, which is confidential. The interim countervailing duty is 1.3%. The 29.4% combined rate we previously carried under “all other exporters” no longer applies. Your broker still confirms the DSN at entry. The position covers aluminium extrusions we supply directly, within the register’s goods description.
FOB vs DDP: Who Carries the Duty Risk
Under FOB or CIF terms, you are the importer of record. Duty is assessed on your entry, at the rates in force on the entry date, and the stack above is your cost to model. A supplier’s FOB price never includes your duty unless the contract says so in writing.
Under DDP, the seller prices duty in. That transfers the payment, not the need to verify. Before accepting a DDP quote from any supplier, get four things in writing:
- Who acts as importer of record, and under what entity
- Which HS code and which origin will be declared for your goods
- Whether anti-dumping or countervailing deposits are inside the quoted price
- What happens to the price if the assessment changes between order and arrival
The last point is not theoretical: US rates on metal trim changed three times between June 2025 and July 2026. A DDP price agreed in a quiet month can be re-opened in a loud one, unless the contract fixes who absorbs the change.
The Buyer’s Self-Check, in Order
- Fix the product form. Material and alloy, hollow or open cross-section, lengths, surface finish, and whether pieces arrive cut or in standard lengths. This settles the candidate heading.
- Run the official tools. USITC search for the US, TARIC for the EU, the UK Online Tariff for the UK, ABF pages and the Dumping Commodity Register for Australia. Read the Chapter 99 or measure notes, not just the headline rate.
- Check the remedy layers for your origin. Section 232 annexes, Section 301 actions, and anti-dumping measures are all origin-specific. A rate quoted for another origin tells you nothing.
- Give your broker the full file. Cross-section drawing, alloy or grade, production route, and where the billet or resin came from. Brokers classify what you show them; thin files produce generic codes.
- For repeat volume, get the classification in writing. Customs administrations issue binding or advance rulings, and a ruling on your exact product removes the guesswork. Rulings are product-specific, which is the point.
- Re-check at order time. Every figure in this guide is dated October 2026. Measures open, expire and get reviewed; the check you ran last season is background, not evidence.
At planning stage, the tariff picture belongs inside the wider landed-cost model in our importing guide, next to freight, MOQ and inspection. Profile shapes and materials are compared on the tile trim profiles overview.
FAQs
Is there a single import duty rate for tile trim?
No. Duty is built from the classification, the origin and the destination’s measures for that origin. One profile shape in four materials can produce four different bills in the same port, and the same bill can change between orders.
Does the supplier’s HS code settle my classification?
No. The supplier’s code is a starting point from their export paperwork. Your customs authority classifies the goods at your border, and the importer of record carries the liability if the code is wrong. Have your broker confirm the code against drawings and samples.
Does a DDP price remove my duty risk?
Only the part the contract actually transfers. Check who is importer of record, which code and origin are declared, and who absorbs a rate change in transit. If those answers are not in writing, the risk is still effectively yours.
Can finishing in a third country avoid China measures?
Usually not on its own. Origin for trade remedies follows substantial transformation, and simple cutting, coating or repacking rarely qualifies. The US, EU and UK also run anti-circumvention proceedings. Treat any routing scheme as a ruling question, not a loophole.
How often should I re-check the rates?
At every order. Between June 2025 and July 2026 the US doubled its metals duty, added copper and moved to full-value assessment. It then added a China-wide layer, while the EU opened an expiry review of its extrusion duties. Last year’s spreadsheet is not a safe basis for this year’s price.