Restocking tile trim is a timing question, not a guessing game. You reorder a profile when stock falls to a level that covers sales until the next delivery lands. You order enough to clear the supplier minimum, and you keep the range wide enough that a contractor finds the height and finish they need. This guide shows how distributors set those three numbers: when, how much, and how wide.
The short answer is to work from your own sales records. Rank each SKU by how fast it sells, set a reorder point for each rank, and round every order up to the material minimum. A 20 to 30 working day bulk lead time means the reorder point must cover a month of sales, not a week. The rest of this guide turns that rule into a routine you can run every month.
The restock rule in one line
Every restock decision has three parts. The reorder point tells you when to order, and the order quantity tells you how much to buy. The range review tells you whether a SKU still earns its shelf space. When all three run on your own sales data, stockouts and dead stock both shrink. When any one runs on habit, the other two cannot fix it.
A reorder point is a stock level, not a date. You place the order when on-hand stock falls to that level, and the level must cover demand until the new delivery arrives. Demand during the wait is the daily usage times the lead time in days, with a small safety buffer on top. If the point is too low, you run out before the truck arrives; if it is too high, cash sits on the shelf.
Start from your own sales, not a bestseller list
No public bestseller list can set your reorder points. A profile that moves fast in one region may sit still in another, since local tile sizes and builder habits differ. Your own invoices are the only record that reflects your customers. Pull sales by SKU for the last six months and sort the list by units sold. The shape of that list sets the rest of the plan.
Split the list into three tiers. Fast movers sell every week and must never stock out, since a contractor who cannot get the standard profile today buys it from another supplier. Steady sellers move every month and can carry a lower buffer.
Slow movers sell only a few times a year, so they need a different rule: order only against a confirmed project, or drop the SKU. Review the tiers each quarter, since a slow SKU can turn fast when a new housing project starts nearby.
| Tier | What it means | Reorder rule |
|---|---|---|
| Fast mover | Sells every week | High reorder point, checked weekly, never allowed to stock out |
| Steady seller | Sells every month | Standard reorder point, checked monthly |
| Slow mover | Sells a few times a year | Order only against a confirmed project or a named buyer |
When a steady seller starts moving weekly, raise its reorder point at once. When a fast mover slows for two quarters in a row, cut its buffer and free the cash for a SKU that is moving.
Set reorder points that respect the lead time
Lead time is the longest lever in the reorder point. A bulk order from China runs 20 to 30 working days. That window starts when the factory confirms the order, not when you send the email. Freight and clearance sit on top of production time. Set the reorder point from the full wait, not from the factory time.
Samples move faster, and that matters for new SKUs. A standard sample ships in about 7 days, while a custom sample takes 7 to 10 days. Use that window to confirm a new height or finish before the bulk order, not after. A sealed sample is kept for 2 years, so a repeat order can be checked against the approved piece.
Safety stock is the buffer for the weeks when demand or delivery slips. It needs no formula to start: pick a level that covers one or two busy weeks for fast movers, and less for steady sellers. Watch how often you dip into the buffer.
If you touch it every cycle, the reorder point is too low. If you never touch it, the buffer is too deep, and that cash can fund a faster SKU. The sizing guide covers the height rule behind the usage numbers, so the demand you measure matches the profile you order.
Order size: round up to the material minimum
Order quantity starts with the supplier minimum, not with the reorder formula. A formula may say you need 300 pieces, but if the material minimum is 500, the order is 500. Round every order up to the next minimum, and never split a minimum across two materials. The table below lists the minimums by material for this supplier.
| Material | Grade | Minimum order | What it means for restocking |
|---|---|---|---|
| Aluminum | 6063 / 6463 | 1,000 pcs | One restock is a full 1,000 pieces, so order only when the tier justifies the depth |
| Stainless steel | 304 / 316 | 500 pcs | A mid-size restock that suits steady sellers in wet rooms |
| Solid brass | H59 | 200 pcs | A low minimum that lets you top up a slow finish without burying cash |
| PVC | Standard | 2,000 pcs | A large restock, so confirm the demand before you commit |
A low minimum changes the shape of a restock. Brass at 200 pieces lets you top up a slow finish, while PVC at 2,000 pieces means a restock is a real commitment. Check the minimum in writing before each order, since terms can change between orders.
The why MOQs differ by material guide explains what drives each number, and the dimensions and compatibility chart shows which heights each material offers.
Combine profiles only when the terms allow it. Some suppliers count the minimum per profile, others per material or per order. Ask which rule applies before you plan a mixed restock, and get the answer in writing. A mixed order that misses the rule can come back short.
Depth or breadth: where the next order goes
Depth means more pieces of the SKUs you already carry. Breadth means new SKUs: a new height, a new finish, or a new profile shape. Depth protects the fast movers, while breadth wins the next contractor. The next contractor may need a 12.5 mm brass height or a smoked chrome finish that your range lacks. Most restock budgets should feed depth first, since a stockout on a fast mover loses a sale you already had.
Add breadth only when a gap is confirmed. A contractor asking twice for the same missing height is a signal, while a single request is a question, not a gap. Before adding a SKU, check the minimum order for its material and the sample time, and confirm the finish with a physical sample. A new SKU that arrives without a buyer is a slow mover from day one.
If any term in this section is new, tile trim basics covers the profile shapes before you choose one.
Keep the range review separate from the reorder run. Reordering is weekly or monthly, while a range review is quarterly. If the two mix, every restock becomes a debate about new products, and the fast movers wait. Your first range guide sets the starting range; this guide keeps it fed.
Project and seasonal signals worth tracking
Project work moves trim demand in steps, not in a smooth line. A housing project that breaks ground needs edge trim in bulk, then nothing for months. A contractor who wins a hotel refit needs one finish across many rooms. Track confirmed project orders, not rumors. When a contractor shares a project schedule, note the trim heights and the month the work starts.
Seasonal demand is real, but its shape is local. Your own monthly sales by SKU show your season better than any general claim. Pull the same month across two or three years, and look for the pattern. If a height sells out every year in the same quarter, raise its reorder point ahead of that quarter.
Showroom and counter requests are early signals. When installers start asking for a height you do not stock, log the request with the date. Three requests in a month is a trend worth a sample order. One request is a note.
What to do with slow movers
Every range collects slow movers. A finish that sold well two years ago may sit still today, while a profile added for one project may never sell again. The first step is to name them. Each quarter, list the SKUs with no sales in the last six months. Sort them into three groups: project stock, seasonal stock, and dead stock.
Project stock stays if a named project still needs it. Seasonal stock stays if last year shows sales in the coming quarter. Dead stock needs a decision, not another quarter on the shelf. Bundle it with a fast mover, offer it to contractors who already buy the matching height, or clear it through the counter. Check the tile trim cost guide before you price a clearance bundle, so the bundle still covers its landed cost.
Do not reorder a slow mover on habit. If a SKU has not sold in six months, the next order needs a named buyer or a confirmed project. A reorder point of zero is a valid setting. It means the SKU leaves the active range.
A monthly restock routine
A restock routine beats a restock rush. Once a month, pull sales by SKU, flag every item at or below its reorder point, and raise the orders in one batch. Once a week, check the fast movers only, since they are the SKUs that can run out between monthly reviews.
- Pull sales by SKU for the last month and the last six months
- Flag every SKU at or below its reorder point
- Round each order up to the material minimum
- Confirm lead time and finish availability with the supplier in writing
- Check sealed samples for any SKU returning after a long gap
- Review slow movers and set a reorder point of zero where nothing is confirmed
Keep one row per SKU in a sheet, with four fields: monthly sales, reorder point, on-hand stock, and stock on order. When a contractor calls for a rush quantity, that row answers in seconds. A distributor who runs this sheet never has to guess.
What to confirm with your supplier before each reorder
A reorder is also a chance to re-confirm the terms. Minimums, lead times, and finishes can change between orders, and a verbal promise from last year is not a term. Ask for the current minimum by material, the current bulk lead time, and the finish list in writing.
Brass finishes deserve a separate line. Lacquered, chrome-plated, and smoked chrome read very differently on site, so name the finish on the order, not just the word brass.
Ask about the sample behind the order. A sealed sample kept for 2 years is the reference for a repeat run. Ask whether the sample for your SKU is still on file. If the mould is custom, ask whether the mould fee refund still applies at your cumulative volume. These are small questions. They prevent the two most common reorder disputes: the wrong finish, and a profile that no longer matches the first batch.
Speed matters when a stockout is near. A supplier that answers a technical question within one working day lets you confirm a height or a finish before the order ships, not after. Put the supplier contact and the current terms on the same page as your reorder sheet. Then the person who raises the order does not have to hunt for them.
Restocking is a habit, not a project. Set the reorder points from your own sales, round orders up to the material minimum, and review the range every quarter. The distributors who rarely stock out are not the ones with the biggest warehouse. They are the ones whose reorder points move when their sales move. Start with your five fastest SKUs this week, and the rest of the range follows.
Frequently asked questions
How do I set a reorder point for tile trim?
Multiply your daily usage by the lead time in days, then add a safety buffer. Use the full wait, not the factory time alone: bulk production runs 20 to 30 working days, and freight and clearance sit on top. If you dip into the buffer every cycle, the reorder point is too low.
What is the minimum order for tile trim?
It depends on the material: aluminum 1,000 pieces, stainless steel 500, solid brass 200, and PVC 2,000. Round every order up to the next minimum, and confirm in writing whether the minimum counts per profile, per material, or per order before you plan a mixed restock.
How often should a distributor review tile trim stock?
Check fast movers every week, review the full range once a month, and run a range review every quarter. The weekly check catches stockouts between monthly reviews, while the quarterly review moves SKUs between tiers and sets slow movers to a reorder point of zero.
What should I do with slow-moving tile trim?
Sort it into project stock, seasonal stock, and dead stock. Keep project stock only for a named project, and keep seasonal stock only if last year shows sales in the coming quarter. Clear dead stock by bundling it with a fast mover or offering it through the counter, and do not reorder it without a named buyer.
How do I avoid ordering the wrong finish on a repeat order?
Name the finish on the order, not just the material. For brass, write lacquered, chrome-plated, or smoked chrome, since the three read very differently on site. Ask whether the sealed sample for your SKU is still on file, since it is kept for 2 years and is the reference for the repeat run.